AUTOMOTIVE A/C IN LINE FILTER  A/C LIVE FLUSH FILTER

"Servicing The World With Automotive Air Conditioning Theory and Diagnosis"

A/C MOTORS

"Automotive Air Conditioning is Our Only Business"

A/C IN LINE  LIVE FLUSH FILTER

Complete kit includes all the instructions required .  Simply cut the liquid line  and install.

Locate 1 3/4 " of straight liquid line tubing, Remove No more than 1 7/8" of line (caution:  Removal of  more than 1 7/8 " will require repositioning line

In-Line A/C Filter; 2011 For 1/2"   3/8"  5/16" Tube   ONE FILTER FITS ALL 

Call 386-774-2653 to order, Mon-Fri. 9am-6-pm  EST  

OR PAY WITH PAYPAL 

$59.95

 

STRAIGHT LINE OF TUBING MARK 1 3/4" WITH FELT PEN/PENCIL  CUT THE 1 3/4 SECTION

YOU CAN INSTALL THIS FILTER WITH IN 15 MIN

                 CUT STRAIGHT TUBE              NO MORE THAN 1 3/4 "          CLEAN BOTH ENDS W/ PAPER

ALL YOU NEED FOR LINE WORK

TAKES LESS THAN 15 MINUTES TO INSTALL

Why install an in-line filter?


Your car's air conditioning system relies on A/C compressor oil to be circulated throughout the system and maintain compressor lubrication. In fact, the a/c compressor and the seals are the the only reason for ac oil.  There are no other components that require lubrication, and on orifice tube systems, the A/C compressor is the only moving part!

When the air conditioning system starts to get contaminated, (because of moisture) harmful acids are formed. Those acids cause corrosion and debris. That corrosion easily can restrict an orifice tube or expansion valve. When that happens, the flow of oil to your compressor stops!

When you install an in-line A/C filter, you provide a much larger filter surface. Above that, the filter is designed to trap and hold more contamination and debris. That way, you will always maintain a flow of refrigerant oil to your A/C compressor.

  It's a must to install an in-line filter to meet compressor manufacturer's warranty. This filter will meet those warranties and help prevent future failures

 The orifice tube is mounted in-line between the condenser and the evaporator.

The filter should be installed in the LIQUID LINE BEFORE the orifice tube.

THERMOSTATIC EXPANSION VALVES, the valve would be in place of the orifice tube

autoacrepairs.com

ONE KIT FITS ALL 3 SIZES #6 #8 #10 ALUMINUM TUBE

1/2" DISCHARGE LINE

3/8" DISCHARGE LINE

5/16" DISCHARGE LINE

3/8" DISCHARGE LINE

5/16" DISCHARGE  LINE

REMEMBER 1 KIT FITS ALL AC LINES

COMPRESSOR MANUFACTURERS  RECOMMEND INSTALLING THE LIVE FLUSH FILTER IN THE  LIQUID LINE.

AFTER INSTALLING THE LIVE FLUSH FILTER , EVACUATING AND CHARGING TO FACTORY SPECIFICATIONS

$59.95

ALL DIRECTIONS WILL BE SENT WITH YOUR ORDER, IF YOU HAVE ANY PROBLEM UNDERSTANDING THESE DIRECTIONS CALL 386-774=COLD (2653)

                                                                    

LIVE FLUSH THE CONDENSER UNDER ACTUAL SYSTEM TEMPERATURE AND PRESSURE. THE FILTER WILL CATCH ALL DAMAGING RESIDUE COMING FROM THE CONDENSER.

 

NO MORE NEEDLESS, COSTLY, AND TIME CONSUMING CONDENSER REPLACEMENT.

 

WHERE IS THE STRAIGHT LIQUID LINE?

IF YOU HAVE A ORIFICE TUBE SYSTEM THE LINE IS BETWEEN THE CONDENSER AND THE ORIFICE TUBE   CLICK HERE

IF YOU HAVE A EXPANSION VALVE SYSTEM THE LINE IS BETWEEN THE CONDENSER  AND THE RECEIVER DRIER.  CLICK HERE

REMEMBER A ORIFICE TUBE HAS A ACCUMULATOR AND A EXPANSION VALVE HAS A RECEIVER-DRIER

TO PRODUCTSNEXT

Thank You For Visiting Autoacrepairs.com.

AutoA/C Repairs Home